Old beige tile on one side and new patterned stickers on the other, with a hand smoothing a sticker with a squeegee

How to Apply Tile Stickers Over Existing Tile (and What to Do With Grout)

Dated tile is one of the most common reasons people look for peel and stick tile stickers. Beige 1990s squares, a pink bathroom, a builder-grade backsplash: they're all perfectly good tiles in the wrong color. Instead of chiseling them off, you can cover them, one tile at a time.

Here's how to get a result that looks like a real retile.

Why existing tile is the perfect base

Glazed ceramic tile is smooth, flat and non-porous, which is exactly what adhesive vinyl loves. Even better, the tile grid does your layout work for you: every sticker has a clear place to go, so rows stay straight without measuring.

Mi Alma tile stickers are fully opaque, so the old color and pattern won't show through the new design.

Step 1: Check your tile

Before you order, look closely at the surface:

  • Smooth, glazed tile: ideal.
  • Light texture: usually fine, but test a sample first.
  • Deep texture, raised patterns or very rough stone: texture can show through the sticker and reduce adhesion.
  • Loose or cracked tiles: repair them first.
Placing each sticker inside its tile keeps the real depth of a tiled wall.

Step 2: Measure the tile face

Measure a single tile from edge to edge, not including the grout. That measurement is the sticker size you order. Mi Alma designs come in many square sizes, and if yours is unusual, custom sizes are available by message. Then count the tiles and follow our pack calculator.

Step 3: Deep clean

Old tile carries years of grease, soap and cleaning-product film, all of which weaken adhesion.

  1. Scrub with a degreaser (kitchen) or soap-scum remover (bathroom).
  2. Rinse with clean water.
  3. Dry completely. In a shower, wait at least five hours after the last use.

Step 4: Apply one sticker per tile

Peel part of the backing, align the sticker with the tile edges, and press from the center outward with a squeegee. Our Pro Installation Kit has a dual-surface squeegee and a precision cutter for edge pieces. For the full process, see how to install peel and stick tile stickers.

What about the grout?

Leave it visible. Don't stretch stickers over grout lines and don't try to cover the grout with one large sheet. Placing each sticker inside its tile keeps the real depth of a tiled wall, and that's what makes people ask whether you retiled.

If the grout itself looks tired, clean it well before you begin. A fresh, even grout color frames the new design and makes it look intentional.

Choosing a design for your old tile

Think about what's staying in the room:

  • White or cream grout makes bold Mexican and Spanish patterns pop.
  • Gray grout works beautifully with black and white and Delft designs.
  • Small 4" tiles are a classic match for Talavera-style patterns like SB47.
  • Large tiles can carry big motifs or a calm solid color.

For more help, read how to choose tile sticker colors.

Common mistakes to avoid

  • Skipping the degreaser. Tile that looks clean can still have an invisible film.
  • Ordering by guesswork. Always measure the tile face, not the tile plus grout.
  • Rushing the first row. If the first row is off, every row after it will be too.

Frequently asked questions

Will the old tile color show through?

No. Mi Alma stickers have an opaque background, so the design covers the tile underneath.

Do I need to remove the grout?

No. Leave the grout in place and visible for the most authentic look.

Can I do this in a bathroom?

Yes, on walls including showers. The stickers resist heat and water up to 122°F (50°C). Apply only to a fully dry surface. See our bathroom makeover guide.

Can I cover floor tiles too?

Yes, with floor-suitable designs and a clear water-based sealer. Read tile stickers for floors and stairs.

See it for real

Browse real transformations in our backsplash before and after and bathroom before and after stories. Then find your new look in all tile stickers.

Back to blog